Refrigerant Filling Equipment for R134a and R1234yf Applications
Introduction
Refrigerant charging is one of the final and most quality-sensitive steps on an automotive assembly line. Every vehicle air conditioning system must be evacuated and charged with a precisely measured amount of refrigerant before it leaves the plant, and even small dosing deviations can affect cooling performance, system pressure, and long-term reliability. As the industry transitions between R134a and the lower-GWP refrigerant R1234yf, filling equipment must handle both media with consistent accuracy and repeatable process control.

A R134a R1234yf refrigerant filling machine is designed to perform vacuum evacuation and refrigerant charging automatically within a single cycle. This article explains how this type of refrigerant filling equipment works, what its key features are, which technical specifications define its performance envelope, and where it fits into automotive manufacturing and intelligent factory automation.
Product Overview
The Refrigerant Vacuum Filling Machine is a PLC-controlled system that automatically performs vacuum evacuation and refrigerant filling for vehicle air conditioning systems. It combines a vacuum pump, a dedicated pneumatic plunger pump, and a mass flow meter to deliver refrigerant at high pressure while measuring the charged quantity precisely.
The equipment is intended for automotive air conditioning system filling applications. It is built around three process functions: evacuating air from the vehicle air conditioning circuit, delivering refrigerant under pressure, and measuring the filling quantity to ensure accurate dosing. Because the vacuum and filling steps are controlled by the PLC system, the machine is suited to production environments where repeatable filling quality and reduced manual intervention are priorities.
The machine supports both R134A and R1234yf refrigerants, which allows the same equipment platform to serve lines producing vehicles with either refrigerant type.
Working Principle
The filling process follows a controlled sequence managed by the PLC-based control system:
Vacuum evacuation: The PLC controls the vacuum pump to evacuate the air conditioning system of the vehicle body. Removing air and moisture from the circuit is a prerequisite for correct refrigerant charging.
Refrigerant delivery: After evacuation, a dedicated pneumatic plunger pump delivers the refrigerant to the vehicle system.
Mass flow measurement: A mass flow meter measures the filling quantity in real time, allowing the system to dose the refrigerant accurately.
High-pressure charging: The combination of the plunger pump and mass flow meter supports precise, high-pressure refrigerant filling.
Because the vacuum and filling stages are automated and coordinated by the control system, the filling process can be completed in a single cycle. This single-cycle approach, together with the mass flow measurement method, supports stable filling performance and consistent filling quality across vehicles.
Key Features
Precise Refrigerant Filling
High-precision mass flow measurement ensures accurate refrigerant dosing, stable filling performance, and consistent filling quality. The specified filling accuracy is ±5 g.
Automatic Vacuum Evacuation
The PLC-controlled vacuum pump automatically evacuates the vehicle air conditioning system before refrigerant filling, improving process efficiency and reliability. The minimum vacuum level is specified as < 2 mbar, with a vacuum pump capacity of 30 m³/h.
Compact Structure and Easy Maintenance
A compact and optimized machine design supports convenient operation, easy maintenance, and reliable long-term performance. The standard equipment dimension is 1800 × 1000 × 1800 mm and is customizable.
High Automation Level
Automated control of vacuum evacuation and refrigerant filling reduces manual intervention, simplifies operation, and improves production efficiency. The filling volume is displayed over a range of 0.0 to 9999 mL, and the filling pressure range is 1 to 3.5 bar.
Technical Specifications
| Equipment Dimension | 1800 × 1000 × 1800 mm (Customizable) |
| Applicable Refrigerant | R134A / R1234yf |
| Minimum Vacuum Level | < 2 mbar |
| Vacuum Pump Capacity | 30 m³/h |
| Filling Volume Display | 0.0 ~ 9999 mL |
| Filling Pressure | 1 ~ 3.5 bar |
| Filling Accuracy | ±5 g |
| Filling Cycle Time | <200 s (Based on single filling below 2 kg) |
| Power Supply | AC380V ±10%, 50Hz ±2% |
| Air Supply Pressure | 0.4 ~ 0.5 MPa |
| Rated Power | 5 kW |
Applications
The Refrigerant Vacuum Filling Machine is designed for automotive air conditioning system filling. Its typical position in the production flow is at the point where the vehicle air conditioning circuit is evacuated and charged with refrigerant before final inspection and vehicle release. It is part of KINMARK's broader fluid filling equipment portfolio for automotive manufacturing.
Automotive manufacturing: Charging of vehicle air conditioning systems on final assembly lines.
New energy vehicles: Air conditioning system filling for vehicles using R134a or R1234yf refrigerants.
Intelligent factory automation: PLC-controlled, automated filling integrated into production processes where reduced manual intervention and consistent dosing are required.
Because the equipment supports both R134A and R1234yf, it can be applied to production environments where the refrigerant type varies by vehicle model or platform.
Benefits
Accurate dosing: Mass flow measurement with ±5 g filling accuracy supports consistent refrigerant charge per vehicle.
Process reliability: PLC-controlled vacuum evacuation before filling helps ensure the air conditioning circuit is properly prepared for charging.
Single-cycle filling: Completing evacuation and filling in one cycle simplifies the production step and supports stable output.
Reduced manual intervention: Automated control of vacuum and filling simplifies operation and supports production efficiency.
Maintainability: The compact, optimized design supports convenient operation and easy maintenance for long-term use.
Why Choose KINMARK
KINMARK is a manufacturer of marking and traceability systems, servo press systems, fluid filling systems, and robot automation systems for automotive intelligent manufacturing. The company's fluid filling product line includes refrigerant vacuum filling equipment for R134a and R1234yf applications, developed within a broader portfolio that covers vehicle assembly, powertrain, automotive components, and new energy vehicle manufacturing. KINMARK also provides integrated fluid filling solutions for different automotive production requirements.
KINMARK provides a 12-month warranty for the complete machine, professional technical support, and long-term maintenance service. After-sales support includes efficient response, remote diagnosis, and technical assistance to help maintain continuous operation. Engineers provide equipment installation, commissioning, and operator training so that customers can bring the filling process into production smoothly.
Frequently Asked Questions
Which refrigerants can this refrigerant filling machine handle?
The machine is applicable to R134A and R1234yf refrigerants, allowing one equipment platform to serve vehicles using either refrigerant type.
How is the refrigerant filling quantity measured?
A mass flow meter measures the filling quantity while a dedicated pneumatic plunger pump delivers the refrigerant. This combination supports precise, high-pressure refrigerant filling with a specified filling accuracy of ±5 g.
Does the machine evacuate the air conditioning system before filling?
Yes. The PLC-based control system automatically controls the vacuum pump to evacuate the vehicle air conditioning system before refrigerant filling. The minimum vacuum level is specified as below 2 mbar.
What is the filling cycle time?
The filling cycle time is specified as less than 200 seconds, based on a single filling below 2 kg.
What support is provided with the equipment?
The complete machine is covered by a 12-month warranty with professional technical support and long-term maintenance service. KINMARK engineers provide installation, commissioning, and operator training, supported by remote diagnosis and technical assistance.
Conclusion
Refrigerant filling equipment for R134a and R1234yf applications combines automatic vacuum evacuation, high-pressure refrigerant delivery, and mass flow measurement into a single controlled process. For automotive manufacturers, the value lies in accurate dosing, repeatable filling quality, and a simplified production step that reduces manual intervention. As vehicle air conditioning systems move between refrigerant types, equipment that supports both R134A and R1234yf provides a practical foundation for consistent refrigerant charging on modern assembly lines.
If you're interested in any of the equipment mentioned in this article, feel free to contact our sales engineers for detailed product information and customized technical solutions.
