Automotive AC Refrigerant Charging Machines: Process and Equipment Overview

2026-11-17 Technical Insights

Introduction

Refrigerant charging is one of the final and most quality-critical steps on an automotive assembly line. After the air conditioning circuit is assembled, the system must be evacuated and then charged with the correct mass of refrigerant under controlled pressure. If air or moisture remains in the circuit, or if the charge quantity drifts, the result is poor cooling performance, compressor wear, and rework at the end of the line.

An automotive AC refrigerant charging machine is the station equipment that performs this evacuation and charging sequence automatically. This overview describes the process, the working principle of a PLC-controlled refrigerant vacuum filling machine, its key features, the applications it serves, and the factors engineers and purchasing teams should consider when specifying equipment.

What Is an Automotive AC Refrigerant Charging Machine?

An automotive AC refrigerant charging machine is a dedicated filling station that combines vacuum evacuation and refrigerant dosing in one controlled cycle. Rather than relying on manual gauges and operator judgement, the machine uses a PLC-based control system to sequence the vacuum pump and the refrigerant delivery circuit, and a mass flow meter to measure how much refrigerant has actually entered the system.

In the KINMARK fluid filling product range, this equipment is classified as a refrigerant vacuum filling machine. Its purpose is straightforward: remove air and moisture from the vehicle air conditioning system, then deliver a measured, high-pressure refrigerant charge in a single filling cycle. Learn more about the Refrigerant Vacuum Filling Machine.

The Refrigerant Charging Process on an Assembly Line

The charging process follows a defined sequence. Understanding this sequence helps production engineers evaluate where the station fits in the overall vehicle assembly flow and what utilities and cycle time it requires.

Step 1: Connection to the Vehicle AC Circuit

The station is connected to the vehicle air conditioning system through service ports. Correct connection is the prerequisite for both evacuation and charging, and it determines whether the vacuum can be held and whether the charge mass is delivered accurately.

Step 2: Vacuum Evacuation

A vacuum pump evacuates the air conditioning system. Removing air and moisture before charging is essential because non-condensable gases and moisture degrade cooling performance and can damage system components. The vacuum pump on the KINMARK refrigerant vacuum filling machine has a capacity of 30 m³/h and can reach a minimum vacuum level below 2 mbar.

Step 3: Refrigerant Filling

Once evacuation is complete, a dedicated pneumatic plunger pump delivers refrigerant into the system, while a mass flow meter measures the filling quantity. Filling pressure is controlled within a range of 1 to 3.5 bar, and the filling volume is displayed from 0.0 to 9999 mL.

Step 4: Completion and Verification

Because the filling quantity is measured by mass flow, the process can be completed in a single cycle with a defined accuracy of ±5 g. The filling cycle time is under 200 seconds when filling below 2 kg in a single operation.

Process note: Evacuation quality and charge accuracy are linked. A system that is not fully evacuated cannot be accurately charged, which is why PLC-controlled sequencing of the vacuum pump and filling circuit matters more than the individual components alone.

Working Principle of a PLC-Controlled Refrigerant Vacuum Filling Machine

The machine uses a PLC-based control system to automatically control the vacuum pump and evacuate the air conditioning system of the vehicle body. After vacuum evacuation, the dedicated pneumatic plunger pump delivers the refrigerant, while the mass flow meter accurately measures the filling quantity to ensure precise, high-pressure refrigerant charging. For more information about industrial vacuum filling equipment, see Vacuum Filling Machines.

This architecture separates the two physical tasks — evacuation and dosing — and places both under the same automatic sequence. The result is a filling process that can be completed in a single cycle, with consistent dosing governed by measurement rather than by time or pressure alone.

Key Features

  • Precise refrigerant filling. High-precision mass flow measurement supports accurate refrigerant dosing, stable filling performance, and consistent filling quality, with a stated filling accuracy of ±5 g.

  • Automatic vacuum evacuation. The PLC-controlled vacuum pump automatically evacuates the vehicle air conditioning system before refrigerant filling, improving process efficiency and reliability.

  • Compact structure and easy maintenance. A compact, optimized machine design supports convenient operation, easy maintenance, and reliable long-term performance.

  • High automation level. Automated control of vacuum evacuation and refrigerant filling reduces manual intervention, simplifies operation, and improves production efficiency.

Technical Specifications

Equipment Dimension1800 × 1000 × 1800 mm (Customizable)
Applicable RefrigerantR134A / R1234yf
Minimum Vacuum Level< 2 mbar
Vacuum Pump Capacity30 m³/h
Filling Volume Display0.0 ~ 9999 mL
Filling Pressure1 ~ 3.5 bar
Filling Accuracy±5 g
Filling Cycle Time<200 s (based on single filling below 2 kg)
Power SupplyAC380V ±10%, 50Hz ±2%
Air Supply Pressure0.4 ~ 0.5 MPa
Rated Power5 kW

Applications

The refrigerant vacuum filling machine is designed for automotive air conditioning system filling. Its combination of vacuum evacuation, high-pressure filling, and mass flow measurement makes it relevant to the following areas:

Vehicle Assembly and Final Line Charging

In vehicle assembly, the AC circuit is charged as part of the final assembly flow. The single-cycle filling capability and automatic sequencing support a defined station cycle time, and the compact footprint allows integration into an existing line layout.

New Energy Vehicles

New energy vehicles also carry air conditioning systems that require evacuation and charging during assembly. The machine's support for both R134A and R1234yf refrigerants allows the same equipment platform to serve different refrigerant strategies. For related vehicle thermal management applications, see the New Energy Cooling System.

Powertrain and Component Manufacturing

Where air conditioning or thermal management circuits are assembled and tested as sub-assemblies, the same evacuation and dosing principle applies to the filling station.

Intelligent Factory Automation

Because the vacuum and filling sequence is PLC-controlled, the station can operate as an automated unit within a broader production line rather than as a manually operated bench.

Benefits for Production and Quality Teams

  • Consistent charge quality. Mass flow measurement supports consistent filling quality from vehicle to vehicle, reducing variation that can lead to cooling performance complaints.

  • Fewer manual steps. Automated control of evacuation and filling reduces manual intervention and simplifies operation for line operators.

  • Single-cycle completion. The filling process can be completed in one cycle, which supports predictable station timing.

  • Maintainability. The compact, optimized design supports convenient operation and easy maintenance for long-term line reliability.

Equipment Selection Considerations

When evaluating an automotive AC refrigerant charging machine, engineering and purchasing teams typically review a set of practical questions against their line requirements.

Refrigerant Compatibility

Confirm which refrigerant the production program uses. The KINMARK refrigerant vacuum filling machine supports R134A and R1234yf.

Charge Accuracy Requirement

Match the equipment's filling accuracy to the vehicle specification. This machine is rated at ±5 g.

Vacuum Performance

Evacuation quality sets the ceiling for charging quality. The machine reaches a minimum vacuum level below 2 mbar with a 30 m³/h vacuum pump.

Cycle Time and Line Balance

Compare the filling cycle time against the takt time of the station. The cycle time is under 200 seconds based on a single filling below 2 kg.

Site Utilities and Footprint

Check power supply (AC380V ±10%, 50Hz ±2%), air supply pressure (0.4 ~ 0.5 MPa), rated power (5 kW), and the equipment dimension of 1800 × 1000 × 1800 mm, which is customizable.

Why Choose KINMARK for Refrigerant Filling Equipment

KINMARK (Jinan Zhongzheng Jinma Technology Co., Ltd.) has been developing automotive intelligent automation equipment since 1996, beginning with marking machines and expanding into marking and traceability systems, servo press systems, fluid filling systems, and robot automation systems. The fluid filling line includes refrigerant vacuum filling machines alongside other filling equipment for automotive production. Explore KINMARK's Fluid Filling Solutions.

The company serves vehicle manufacturers, powertrain and component producers, and new energy vehicle programs, and maintains offices and service centers in cities including Shanghai, Beijing, Guangzhou, Changchun, Wuhan, and Chongqing. For refrigerant filling stations, KINMARK provides:

  • 12-month warranty on the complete machine, with professional technical support and long-term maintenance service.

  • Fast response service, including efficient after-sales support, remote diagnosis, and technical assistance to support continuous operation.

  • Installation and commissioning, with engineers providing equipment installation, commissioning, and operator training to help customers start production smoothly.

Frequently Asked Questions

Which refrigerants can the refrigerant vacuum filling machine handle?

The machine is designed for R134A and R1234yf refrigerants.

How accurate is the refrigerant filling?

The stated filling accuracy is ±5 g, achieved through mass flow measurement of the filling quantity.

Does the machine perform vacuum evacuation automatically?

Yes. A PLC-based control system automatically controls the vacuum pump and evacuates the vehicle air conditioning system before refrigerant filling.

What vacuum level can the machine reach?

The minimum vacuum level is below 2 mbar, using a vacuum pump with a capacity of 30 m³/h.

What utilities does the station require?

The machine requires an AC380V ±10%, 50Hz ±2% power supply with a rated power of 5 kW, and an air supply pressure of 0.4 ~ 0.5 MPa.

Conclusion

Refrigerant charging is a small step in vehicle assembly but a decisive one for air conditioning performance and end-of-line quality. A PLC-controlled refrigerant vacuum filling machine brings evacuation and dosing into a single automated sequence, with mass flow measurement supporting consistent charge quality and a defined filling accuracy of ±5 g.

For production engineers and purchasing teams specifying an automotive AC refrigerant charging machine, the practical evaluation centers on refrigerant compatibility, vacuum performance, charge accuracy, cycle time, and site utilities. Matching these parameters to the line's takt time and vehicle specification is the basis for a reliable, maintainable filling station.


If you're interested in any of the equipment mentioned in this article, feel free to contact our sales engineers for detailed product information and customized technical solutions.