|
l Setting up grouping parameter: Operator set up type, Everything type have multi-grouping, Scope of weight out link weight can be set up freely or tow ends scope of weight.
l Software has code function: common operator just can enter work menu, but don’t modify grouping parameter, only can produce, the expert can set up work menu, grouping information, To improve safety of facility.
l Software had printing function and set serial number function and so on.
l It can weight out link weight of big head or small head or total weight, marking and grouping.
l Weight out link weight, marking, and grouping can be finished automatically.
l Stuff is feeding by operator or automatically.
Special clamp part:
1. It can meet ISO standard in design, made aspect
2. It has enough rigidity, stability, maintainability and easy adjusts
3. Disposing damageable piece which can resist tearing
4.It has clamp auto function, position, clamp can close by itself, Clamp dot and clamp element were designed reasonable, Also has assistant clamping and support device, Clamp part no obviously impress, Piece don’t distort and damage
5. It will alarm when position place is wrong
6. To prevent clamp piece is damaged and protect sensor.
7. Frame of special clamping can easily update. Everything workpiece can be replace, Position pin confirm place. To meet facility increases function of checking link.
8. Stuff box of facility according to operator design, Working is ease.
Weight machine technology parameter:
1.Differentiate power≤0.1g。
2.Repetition ：%GRR≤10%
3.Precision：≤weight scale0.05%
4.linearilty：≤10%×tolerance scope（weight scale 0.05%）。
5.Stability： Different between benchmark value and fact value≤10%×tolerance scope（weight scale 0.05%）
6.Sensor lifecycle：Million times
7. Adopt standard poise calibration 。
8. All poises have identified report, it has excellent precision ability, it can resist rust, it has number of poise in suitable place and permanence marking of weight, and it was in special tool box.
9. It has software setting of link big or small head weight.
Marking part
1、 System flat adopts WINDOWS XP system， Easily operate, Meanwhile can test software, machine performance and fault checking.
2、 It can simulate display, don’t marking; you can watch marking result on the screen, after get excellent result and mark it.
3、 It can edit printing content flexible, such as serial number can add and store, produce form auto, also had calculate auto, at any moment you can check it,
4、 System is stable, software is excellent, and it can work 24 hr continually.
5、 It had net interface, It can connect product line and communication.
6、 System has manifold date box, date can be share.
7、 Input style by hand, support scanning style, also accepts computer information or net date, and it can transmit printing content to computer and workplace.
8、 Software has calibrated code, to prevent operator was wrong.
9、 It has memory function, setting state, serial number, it will return origin state auto when you opening again, and also has check, alarm function.
10、 Facility can print manifold font, Line can be adjust.
11、 Driver is servo drive, engine is stability, high speed, font is beauty.
12、 Facility meets electromagnetism compatible design.
13、 Incorporate control cabinet, safety, seal and dustproof, Main machine, control part, display, USP, mouse, keyboard etc which was in control cabinet, modularization design and distribution, opening and maintain are flexible.
14、 Moving of print style is line rolling guide, synchronization driving style, System return origin and calibration after printing.
15、 Printing head is leadscrew style, Adjust distance of head and piece, printing head had emergency stop function.
16、 Relative origin date of marking weight software, such as big or small head benchmark weight, gross weight standard value, grouping code, change range of allowing and so on, you also can add standard value according to request.
17、 Facility should be calibrated weight part before working.
18、 Sensor has rigidity shield, to prevent damage.
19、 Software interface send piece type according to standard contrast date of weight, and display scope date of error allowing. To prompt operator check directly.
The software records relative date and prints grouping code and information.
sensor technology parameter:
| 
